4 Port PoE Switch - All Questions
4 Port PoE Switch
Special Price $54.00 Regular Price $99.99 46% off
SKU
4POEU
Will this switch work with a 15W camera at 900ft?
Question by: Morris on May 13, 2024, 1:54 PM
At distances of 900ft the extended PoE mode can support up to a 10W camera.
Answer by: Ray (admin) on Jul 19, 2024, 11:18 AM
Can I run a PTZ camera at 600ft distance using this PoE switch?
Question by: Saul on May 23, 2024, 12:49 PM
The switch supports up to 10W power when extended PoE mode is enabled. As long as your PTZ camera requires less than 10W, then it would be ok.
Answer by: Ray (admin) on May 13, 2024, 2:05 PM
Can an AvaEye PoE switch run a PoE camera over 300 ft without an extender? The camera I want to use is PoE+ and consumes 13 Watts when the night time infrared LEDs are on.
Question asked at 8 Port PoE Plus Switch
Question by: Ed on May 18, 2026, 11:32 AMYes, this AvaEye PoE switch can be used for camera runs over 300 ft without a separate PoE extender when Extended PoE mode is enabled and the installation uses good quality solid copper Cat5e or Cat6 cable.
A 13 watt PoE+ camera is a reasonable load for this type of setup, even when the infrared LEDs are on at night, as long as the total PoE budget of the switch is not exceeded. The bigger factors are cable quality, distance, camera power draw, and whether Extended PoE mode is supported and enabled on the switch.
For best results, use solid copper cable, avoid CCA cable, and test the camera before final installation. Extended PoE mode may reduce network speed on that port, but that is usually fine for security cameras. Higher power devices, PTZ cameras, heaters, poor cable, or very long runs may still require a PoE extender, fiber, or a different network design.
A 13 watt PoE+ camera is a reasonable load for this type of setup, even when the infrared LEDs are on at night, as long as the total PoE budget of the switch is not exceeded. The bigger factors are cable quality, distance, camera power draw, and whether Extended PoE mode is supported and enabled on the switch.
For best results, use solid copper cable, avoid CCA cable, and test the camera before final installation. Extended PoE mode may reduce network speed on that port, but that is usually fine for security cameras. Higher power devices, PTZ cameras, heaters, poor cable, or very long runs may still require a PoE extender, fiber, or a different network design.
Answer by: CCTV Camera World on May 18, 2026, 12:47 PM
Related Products
Check items to add to the cart or
