Choose quantities for each item. Set a quantity to 0 to remove it.
Optional Mounts
Junction Box for Fixed Lens Bullet and Dome Cameras, White
Junction Box for Fixed Lens Bullet and Dome Cameras, White
SKU: SCJB
White Camera Junction Box - Metal junction box for select fixed lens bullet and turret dome camera installations.
Weather Resistant Design - Helps protect camera pigtails and cable connections from outdoor exposure when properly installed.
Clean Installation - Conceals wiring behind compatible cameras and gives wall or ceiling mounts a more finished appearance.
Conduit Connection - Built with a G3/4 conduit thread cutout for installations that route cable through conduit.
Compact Metal Body - Aluminum construction measures about 4.13 x 2.20 inches (10.5 x 5.6cm).
Compatibility Note - Check the camera description before ordering. This box is for select models with matching base plate holes.
12V DC 1 Amp Power Supply - Provides 12V DC output for compatible CCTV cameras and other low-voltage security camera equipment.
Center Positive 2.1Mm Plug - Uses a common 2.1mm center-positive DC connector for compatible devices.
Indoor Or Enclosure Use - Designed for indoor use or placement inside a suitable outdoor enclosure.
Power Matching Required - Check the device voltage, amperage, connector size, and polarity before connecting.
Long Run Note - For cable runs over 100ft on 18 AWG power wire, a higher amperage 12V supply may be needed to account for voltage drop.
500ft RG59U Siamese Roll - White video and power cable roll for CCTV camera installations.
Video And Power Cabling - Combines RG59U coax with 18AWG 2-lead power wire for one cable pull.
Economical Cca Conductor - 20AWG CCA video conductor with 95 percent copper braid for budget-conscious installs.
Outdoor Weatherproof Wire - Jacket is listed for outdoor weatherproof use.
HD Run Limit Guidance - Listed as an economical choice for HD camera runs under 350ft.
Pull Out Box - Supplied in a box for easier cable access during installation.
Connectors Sold Separately - BNC connectors and power terminals are needed for termination.
500ft Black Siamese Roll - RG59U video and power cable roll for CCTV camera installations.
One Cable Pull - Carries video over coax and power over 18AWG 2-lead wire in the same jacket.
Economical Cca Coax - Uses a 20AWG CCA video conductor with 95 percent copper braid.
Outdoor Weatherproof Wire - Black jacket is intended for outdoor weatherproof cable use.
HD Run Limit Guidance - Listed as an economical choice for HD camera runs less than 350ft.
Pull Out Box - Box packaging helps feed the cable during installation.
Connectors Sold Separately - Purchase compatible BNC connectors and power terminals for field termination.
1000ft CCTV Siamese Cable RG59U with 18/2 Power, White
1000ft CCTV Siamese Cable RG59U with 18/2 Power, White
SKU: SCWIRE10W
1000ft RG59U Siamese Cable - White economical video and power cable for compatible HD over coax and analog camera installations.
Video And Power In One Pull - Carries camera video and low voltage power through one Siamese cable run.
20Awg Cca Video Conductor - Built as a budget cable option for shorter HD camera runs where CCA wire is acceptable.
95 Percent Copper Braid - Provides shielding for cleaner video when installed with proper connectors and routing.
Run Length Guidance - Product page recommends this economical cable for runs less than 350ft.
1000ft RG59U Siamese Cable - Black economical video and power cable for compatible HD over coax and analog camera installations.
Video And Power In One Pull - Combines RG59U coax with a two lead power pair to reduce separate cable runs.
20Awg Cca Video Conductor - Designed as an economical cable choice for shorter HD camera runs where CCA cable is acceptable.
95 Percent Copper Braid - Helps protect the video signal when the cable is installed correctly.
Run Length Guidance - Best kept to runs under 350ft based on the product page recommendation.
Bulk Cable Connectors for the cable roll you picked
Twist on BNC Connector
Twist on BNC Connector
SKU: BNC02
Twist-On BNC Connector - Tool-light BNC connector for terminating RG59 coax cable without a crimp tool.
RG59U Cable Use - Designed for RG59U coax and siamese cable from a roll, not for premade cable ends.
Field Termination - Strip the coax cable, expose the center conductor, and twist the connector onto the cable end.
Installer Friendly - Useful for basic camera cable repairs, custom cable lengths, and quick analog video connections.
Extra Protection Recommended - Electrical tape or heat shrink can help protect the cable end from moisture after installation.
BNC Crimp Connector - 2-piece BNC connector for terminating RG59U coax cable used in analog camera wiring.
RG59U Cable Fit - Designed for RG59U coax from a cable roll, including siamese camera cable with a 20 AWG center conductor.
Crimp Tool Required - Requires proper cable stripping and a compatible BNC crimping tool for installation.
Not For Premade Cable - Not intended for premade siamese cables that already have molded ends.
Pro Install Part - Useful for installers and DIY users making custom-length BNC video cables.
Single Connector - Listing is for one BNC crimp connector.
Male DC Power Terminal - Screw-terminal adapter with a 2.1mm male DC plug for low-voltage camera power wiring.
No Splicing Needed - Lets installers terminate two-lead bare wire to a DC plug without cutting into a camera pigtail.
12V DC Compatible - Designed for compatible 12V DC power connections using matching polarity and plug size.
Screw-In Terminals - Bare wire is secured using screw terminals, making it useful with siamese cabling, power boxes, and 18AWG DC wire.
Center Positive Plug - Uses center-positive wiring for matching equipment.
Protection Note - For outdoor use, protect the terminal area with tape, heat shrink, or an electrical enclosure.
Female DC Power Terminal - Screw-terminal adapter with a 2.1mm female DC jack for low-voltage camera power wiring.
Power Supply Connection - Lets installers terminate two-lead bare wire to a DC jack for compatible power supply connections.
12V DC Compatible - Designed for matching 12V DC low-voltage equipment with the proper plug size and polarity.
Screw-In Terminals - Bare wire is secured using screw terminals, which is useful with siamese cable and 18AWG DC wire.
Center Positive Jack - Uses center-positive wiring for compatible camera power applications.
Protection Note - For outdoor use, protect the terminal area with tape, heat shrink, or an electrical enclosure.
Avalonix SeriesUse with Avalonix PoE cameras and NVRsMatched recorders, cameras and mounts from the same series set up together on one app.Browse Avalonix
This 5MP HD Security Camera with Night Vision captures video in 3K 5MP resolution, providing image quality on par with that of IP cameras. An excellent feature of this
3K Analog security camera is its compatibility with commonly available RG59 coax cable. Using a high-quality solid copper conductor RG59 coax cable, the camera's
HD security over Coax technology allows the video signal to be run up to 800 feet without signal loss using a compatible HD-DVR recorder. It is a great option for people who want to upgrade to an HD security camera system but do not want to incur the cost of rewiring
their home or business with network cabling for IP cameras.
Whether you are upgrading an existing security camera system or putting together a brand-new one, this 5MP HD over Coax camera is a great choice. The 3.6 mm fixed
lens on this bullet camera captures a wide 87 degree field of view when in 5MP mode. You can keep watch over your property day & night thanks to the high-intensity super-infrared LED that provides night vision for distances of up to 100 feet.
The camera's metal construction makes it suitable for use in harsh weather conditions without protection from an overhang or eave. With the exception of a hurricane or tornado, you can rely on it to keep functioning no matter the
conditions. Mounting options for the camera include a wall, ceiling, or pole. Due to its compact size, it can be used anywhere, including inside. The camera bracket protects the camera pigtail from wire snipping and tampering.
The camera also has an on-screen display menu (OSD) that can be controlled using a DVR or XVR when the camera is in HD mode. The OSD
allows fine control of the video brightness, contrast, gain, and other key video features.
This camera supports a variety of video signal types thanks to its 4-in-1 switchable TVI/ AHD / CVI / CVBS technology. You can choose 5MP in TVI or AHD mode, 4MP in HDCVI mode, or analog CVBS video output for compatibility with a standard-definition older 480P, D1, or 960H DVR. To switch the video signal type, there is a convenient dip-switch located on the pigtail.
Compatibility note: the camera does support 1080P mode in CVI/TVI/AHD mode but requires a compatible 5MP DVR to access the OSD menu to lower the resolution. If you have a DVR that supports a max of 1080P resolution, please contact us after placing the order to set it to the desired resolution. Otherwise the camera will ship in 5MP mode.
*Distance is calculated based on sensor specifications and lab test results according to EN 62676-4 guidelines for security cameras which defines the criteria for recognition and identification.