60W PoE Injector
- High-power PoE Power Injector
- PoE 802.3af/at, PoE+
- 1 PoE, 1 Uplink port
- 60W High-power PoE
This 60W PoE+ injector is designed to power cameras that require more than 30W of power such as our high power Pan Tilt Zoom cameras with infrared. PoE PTZ cameras such as the 4K PTZ Camera or 2K Outdoor PTZ IP Camera require more than 30 Watts, and this 60W PoE injector is the perfect power source. Using a single network cable you can power, control, and receive video from your device.
To maintain signal quality and power delivery, we recommend using solid copper CAT6 cable that can only be found in spools of cable. Please do not use premade-network cable as it is always stranded.
How to extend PoE beyond 300ft?
This 60W PoE injector can also be used for long PoE runs in excess of 300ft by using the PoE extender POEEXT02. As long as the PoE cameras consume less than 8W, the combination of the 60W PoE injector and POEEXT02 allows for multiple cameras to be powered from a single initial network cable.
As illustrated in the image below, the distance between each extender can be a maximum of 300ft before adding an additional extender.
- High Power 60W PoE+ output
- Conforms to IEEE802.3, IEEE 802.3u, IEEE802.3af/at
- Gigabit network ports
- Can be used to power multiple devices with the PoE Extender, POEEXT02
- Comes with AC power cord
- Built-in AC/DC power converter
- IEEE802.3x Flow control
- (1) High-power PoE Power Injector
- (1) Power Cord
|Ports||Two 10/100/1000 Base-TX ports|
|LED Indicators||PWR, PoE indicator|
|Input voltage||100V~240V AC, 50/60Hz|
|Power consumption||Max 65W|
|Operating temperature||32°F - 104°F|
|Storage temperature||-22°F - 140°F|
|Relative humidity||10% - 90% (non-condensing)|
|PoE Standard||High-power PoE, PoE+, IEE802.3af/at|
|Dimensions||5.9" x 2.8" x 1.6"|
|Return Policy||30 Days Return Policy|