Choose quantities for each item. Set a quantity to 0 to remove it.
Optional Mounts
Junction Box for Mini Dome Cameras
Junction Box for Mini Dome Cameras
SKU: JB13
Mini Dome Camera Junction Box - White metal junction box for select metal eyeball dome camera models with matching holes.
Weather Resistant When Installed - Helps protect the camera pigtail and connection area from outdoor exposure.
Conduit Cutout - Built with a G3/4 conduit thread size for routing cable into the junction box.
Direct Or Pole Mount Use - Can mount directly to a wall or connect to the compatible mini pole mount bracket listed for this item.
Compact Aluminum Body - Measures 3.81 x 1.32 inches with a 2.21 lb load rating and 0.36 lb product weight.
Compatibility Note - Listed for specific mini dome models, including the 2K vandal resistant IP dome camera noted in the row data.
Wall Mount Arm Bracket - For installing select turret and dome cameras on a vertical wall surface.
White Aluminum Body - Metal construction with a white finish for indoor or outdoor camera mounting areas.
Cable Pass Through - Provides space for the camera pigtail so wiring can be routed through the bracket for a cleaner install.
Select Camera Fit - Check the camera product description before ordering because the pre-drilled holes match specific dome models.
Size And Load - Measures 6.3 x 4.8 x 3.0 inches and supports up to 2.2 lbs.
Mini Pole Mount Bracket - Pole mount adapter for select smaller security cameras when used with a compatible junction box.
Select Junction Box Compatibility - Pre-drilled plate connects with compatible junction boxes for certain fixed camera installations.
Mast Mounting Range - Designed for masts at least 3.15 inches in diameter, with rear straps supporting up to 5.91 inch mast diameter.
White Aluminum Build - Weather resistant aluminum plate for supported professional outdoor or indoor installs.
Alternate Use - Can also mount select cameras carried by CCTV Camera World directly to rafters when COMPATIBILITY is supported.
Key Specs - 4.94 x 4.49 x 0.79 inches, 6.6 lb load rating, 0.6 lb weight, -40F to 140F operating range.
Compatible set: these 2 products are selected together.
Pendant Mount Bracket for Dome Surveillance Cameras
Pendant Mount Bracket for Dome Surveillance Cameras
SKU: JB220
Dome Camera Pendant Bracket - Pendant mount bracket for select dome security cameras from CCTV Camera World.
Ceiling Drop Mounting - Converts a compatible dome camera into a pendant-style ceiling mount setup with a drop-down rod.
Adapter Plate Required - A compatible camera mount adapter plate is needed to attach the camera to this pendant bracket.
Compatibility Note - Confirm compatibility from the camera product description before ordering.
White Aluminum Build - White aluminum bracket for supported indoor or outdoor professional installations.
Key Specs - 5.07 inch diameter x 22.25 inch length, 4.40 lb load rating, 2 lb weight, -40F to 140F operating range.
Mini Dome Adapter - Metal mounting plate for select compatible mini dome cameras.
Wall Or Ceiling Use - Connects compatible cameras to the JB305W arm mount or JB220 ceiling mount.
Clean Cable Path - Camera pigtail can route through the adapter and mount to keep wiring tucked away.
Aluminum Construction - White aluminum adapter plate with a 2.2 lb load rating.
Compatibility Check Required - Confirm compatibility on the camera description page before ordering. Third-party camera use is at the buyer's risk.
12V DC 1 Amp Power Supply - Provides 12V DC output for compatible CCTV cameras and other low-voltage security camera equipment.
Center Positive 2.1Mm Plug - Uses a common 2.1mm center-positive DC connector for compatible devices.
Indoor Or Enclosure Use - Designed for indoor use or placement inside a suitable outdoor enclosure.
Power Matching Required - Check the device voltage, amperage, connector size, and polarity before connecting.
Long Run Note - For cable runs over 100ft on 18 AWG power wire, a higher amperage 12V supply may be needed to account for voltage drop.
500ft RG59U Siamese Roll - White video and power cable roll for CCTV camera installations.
Video And Power Cabling - Combines RG59U coax with 18AWG 2-lead power wire for one cable pull.
Economical Cca Conductor - 20AWG CCA video conductor with 95 percent copper braid for budget-conscious installs.
Outdoor Weatherproof Wire - Jacket is listed for outdoor weatherproof use.
HD Run Limit Guidance - Listed as an economical choice for HD camera runs under 350ft.
Pull Out Box - Supplied in a box for easier cable access during installation.
Connectors Sold Separately - BNC connectors and power terminals are needed for termination.
500ft Black Siamese Roll - RG59U video and power cable roll for CCTV camera installations.
One Cable Pull - Carries video over coax and power over 18AWG 2-lead wire in the same jacket.
Economical Cca Coax - Uses a 20AWG CCA video conductor with 95 percent copper braid.
Outdoor Weatherproof Wire - Black jacket is intended for outdoor weatherproof cable use.
HD Run Limit Guidance - Listed as an economical choice for HD camera runs less than 350ft.
Pull Out Box - Box packaging helps feed the cable during installation.
Connectors Sold Separately - Purchase compatible BNC connectors and power terminals for field termination.
1000ft CCTV Siamese Cable RG59U with 18/2 Power, White
1000ft CCTV Siamese Cable RG59U with 18/2 Power, White
SKU: SCWIRE10W
1000ft RG59U Siamese Cable - White economical video and power cable for compatible HD over coax and analog camera installations.
Video And Power In One Pull - Carries camera video and low voltage power through one Siamese cable run.
20Awg Cca Video Conductor - Built as a budget cable option for shorter HD camera runs where CCA wire is acceptable.
95 Percent Copper Braid - Provides shielding for cleaner video when installed with proper connectors and routing.
Run Length Guidance - Product page recommends this economical cable for runs less than 350ft.
1000ft RG59U Siamese Cable - Black economical video and power cable for compatible HD over coax and analog camera installations.
Video And Power In One Pull - Combines RG59U coax with a two lead power pair to reduce separate cable runs.
20Awg Cca Video Conductor - Designed as an economical cable choice for shorter HD camera runs where CCA cable is acceptable.
95 Percent Copper Braid - Helps protect the video signal when the cable is installed correctly.
Run Length Guidance - Best kept to runs under 350ft based on the product page recommendation.
Bulk Cable Connectors for the cable roll you picked
Twist on BNC Connector
Twist on BNC Connector
SKU: BNC02
Twist-On BNC Connector - Tool-light BNC connector for terminating RG59 coax cable without a crimp tool.
RG59U Cable Use - Designed for RG59U coax and siamese cable from a roll, not for premade cable ends.
Field Termination - Strip the coax cable, expose the center conductor, and twist the connector onto the cable end.
Installer Friendly - Useful for basic camera cable repairs, custom cable lengths, and quick analog video connections.
Extra Protection Recommended - Electrical tape or heat shrink can help protect the cable end from moisture after installation.
BNC Crimp Connector - 2-piece BNC connector for terminating RG59U coax cable used in analog camera wiring.
RG59U Cable Fit - Designed for RG59U coax from a cable roll, including siamese camera cable with a 20 AWG center conductor.
Crimp Tool Required - Requires proper cable stripping and a compatible BNC crimping tool for installation.
Not For Premade Cable - Not intended for premade siamese cables that already have molded ends.
Pro Install Part - Useful for installers and DIY users making custom-length BNC video cables.
Single Connector - Listing is for one BNC crimp connector.
Male DC Power Terminal - Screw-terminal adapter with a 2.1mm male DC plug for low-voltage camera power wiring.
No Splicing Needed - Lets installers terminate two-lead bare wire to a DC plug without cutting into a camera pigtail.
12V DC Compatible - Designed for compatible 12V DC power connections using matching polarity and plug size.
Screw-In Terminals - Bare wire is secured using screw terminals, making it useful with siamese cabling, power boxes, and 18AWG DC wire.
Center Positive Plug - Uses center-positive wiring for matching equipment.
Protection Note - For outdoor use, protect the terminal area with tape, heat shrink, or an electrical enclosure.
Female DC Power Terminal - Screw-terminal adapter with a 2.1mm female DC jack for low-voltage camera power wiring.
Power Supply Connection - Lets installers terminate two-lead bare wire to a DC jack for compatible power supply connections.
12V DC Compatible - Designed for matching 12V DC low-voltage equipment with the proper plug size and polarity.
Screw-In Terminals - Bare wire is secured using screw terminals, which is useful with siamese cable and 18AWG DC wire.
Center Positive Jack - Uses center-positive wiring for compatible camera power applications.
Protection Note - For outdoor use, protect the terminal area with tape, heat shrink, or an electrical enclosure.
Avalonix SeriesUse with Avalonix PoE cameras and NVRsMatched recorders, cameras and mounts from the same series set up together on one app.Browse Avalonix
This 3K 5MP turret dome camera is one of our latest HD analog cameras that works over coaxial cabling. It captures video at 5MP, which is a higher resolution than 4MP 2K, and is a part of our 4-in-1 series. Our 4-in-1 cameras have the ability to switch to the most common coaxial video signals, so they can work with most DVRs out there, including HDCVI, HD-TVI, AHD, and CVBS. You can set the camera to work with almost any DVR, but we recommend pairing it with one of our HD Analog DVR recorders for optimal performance. Using this camera with our DVR and solid copper coaxial siamese cable means you can run it up to a staggering 1600 feet away! These HD upgrades over coax technology have resulted in cameras that can compete with IP cameras, which is excellent for anyone who doesn't want to go through the cost and effort of rewiring their home or business to achieve an HD security camera system.
The camera’s 5MP 3K image sensor records video at 2592x1944 resolution, producing visual clarity that is over double the standard high-definition 1080P. Even at the lower resolution of 960H CVBS mode, the camera surpasses the performance of traditional analog cameras. In daylight, the camera's 3.6mm lens and sensor combine to provide a viewing angle of 77.5 degrees, enabling it to see facial detail up to 30 feet away. In the dark, the camera automatically switches to black-and-white and beams infrared light up to 100 feet away with its 12 IR LEDs.
This camera, with support for the older analog signal type CVBS, is also a great choice if you need a camera to work with old systems in restaurants and healthcare facilities. Simply let us know what your DVR is, and we’ll set the camera to the right mode to work for you.
Its low-profile design, measuring around 3.6 inches in diameter and 3.1 inches in height, makes it an excellent choice for securing areas that require a smaller, more inconspicuous camera. With an IP67 weather-resistant rating, you can use the camera indoors or outdoors without worrying about rain, and you can install it without any overhang or eaves. The camera can be wall or ceiling mounted, and we recommend that you protect the pigtail in the camera’s bracket or tuck it in the wall or ceiling to prevent vandalism to the wiring.
The camera also has an on-screen display menu (OSD) that can be controlled through our DVR systems, or other compatible 3rd party recorders where available. The OSD will allow you to toggle the video signal output, resolution, video brightness, contrast, gain control, and other key video features.
Compatibility note: some older DVR or XVR may require a firmware update to be compatible with the latest 4MP/5MP CVI protocol. Such firmware is unavailable for older video recorders.
Features
Outdoor Dome Security Camera
White Colored Camera
5MP Sensor
5MP, 4MP, 1080P or 960H Video output selectable using a compatible HD DVR
Supported Resolutions:
5MP CVI at 20fps
4MP, 1080P at 30fps
960H or D1 CVBS at 30fps
12 IR LEDs
100ft Night Vision
3.6mm fixed lens
77.5° angle of view
Built-in IR cut filter (ICR)
SMART IR to minimize IR glare
HDCVI, TVI, AHD, Analog CVBS switchable video output