50ft Siamese Cable, White
$21.00
Overview
50ft White Siamese Cable - Premade video and power cable for compatible analog CVBS and HD over coax camera installs.
BNC Video Connection - BNC male ends are already installed for video connection to compatible cameras and recorders.
12V DC Power Leads - 2.1mm DC power plug and jack help carry 12V DC power with the video run.
Up To 4MP Signals - Suitable for CVI, TVI, and AHD cameras up to 4MP when used within supported limits.
Indoor Installation Use - White jacket is useful for clean indoor or covered cable runs.
Premade Cable Limit - Cable should not be cut and re-crimped because the ends are factory installed.
50ft of Video and Power Siamese Cable for use with both analog CCTV and HD security cameras, add-on microphones, wireless receivers, and any other CCTV equipment that has a BNC video connection and 12V DC 2.1mm jack. This cable is good for use with CVBS signal types or HD over Coax signals up to 4MP resolution.
If you have a 4K security camera, we recommend using a roll of solid copper coax wire for the best signal quality and to safeguard against have power issues that are common with 4K over coax cameras. To learn more about which security camera cable is right for your use, we recommend reading our guide on how to choose security camera cables.
Features
- 50ft BNC Video & Power Wire
- Supports up to 4MP video resolution with HD over coax security cameras
- Compatible with Analog Security Cameras (CVBS)
- Compatible with HDCVI, AHD, and TVI cameras
- Suitable for 12VDC 1Amp or lower power transmission
- Does not support SDI cameras
- Cable Color: White
- BNC Male Video Connector on each end
- DC12V Power Jack/Plug on each end
What’s included?
- (1) 50ft Siamese Video Power Cable, White
Reminder: premade cables cannot be cut and crimped again.
| Brand | AvaEye |
|---|---|
| Warranty | None for accessories |
| Return Policy | Accessories are non-returnable, non-refundable. |
Write Your Own Review