PTZ Camera Wireless Video Transmitter Kit
Special Price
$429.99
Regular Price
$499.99
14% off
Overview
Wireless PTZ Transmitter Kit - Sends analog video and RS485 PTZ control signals between a compatible analog PTZ camera and DVR or controller location.
Pelco-D Compatibility - Designed for analog PTZ cameras that support Pelco-D control.
Video Audio And Data - Supports video, audio, and RS485 control paths for compatible analog PTZ setups.
Clear Line Of Sight Range - Transmits up to 300ft with the included antennas when the signal path is clear.
Optional Longer Range - Can reach up to 1000ft with compatible 2.4GHz high gain panel antennas on both ends.
Multi-Kit Installs - Frequency hopping allows multiple kits in one location, with the page recommending no more than four.
Enclosure Sold Separately - Outdoor mounting may require a suitable weather resistant enclosure.
2.4GHz Digital Wireless Video and RS485 Data Transmitter Set that will allow you turn any analog PTZ camera in to a wireless PTZ camera. This kit is compatible with Pan Tilt Zoom cameras that are Pelco-D protocol compatible. There aren't many products of this kind that can transmit video, audio, and PTZ controls at the same time, and let the user send commands back through the receiver using a PTZ joystick.
This PTZ transmitter and receiver set will transmit a signal up to 300ft away using the included antennas in clear line of sight, and signal can be amplified up to 1000ft using the 2.4GHz High Gain Panel Antenna on both the transmitter and receiver. Keep in mind that wireless transmission is best with line of sight and you can always use a high gain antenna to boost your signal to run the signal farther.
The transmitter and receiver are small in size, approximately 5 inches in width and length and 2 inches tall, and light weight. The digital wireless frequency hopping technology allows multiple PTZ wireless kits to be used in one location. We suggest no more than 4.
If you are looking for a good enclosure to house these units, then try our outdoor weather proof enclosure.
Below is a useful overview video discussing on how to use this PTZ wireless transmitter kit, and see an actual demonstration of what you can expect from the video quality.
What's included?
- (1) 2.4GHz Audio/Video/Data Transmitter
- (1) 2.4GHz Audio/Video/Data Receiver
- (2) Power Supplies
- (2) 3dbi Antennas
Specifications
| Frequency | 2400-2480 MHz, 25-CH Auto Hopping (FCC & CE RTTE) |
|
|---|---|---|
| RF TX Power | 100mW (Average) | No |
| Modulation | 16-QAM,Q | PSK,BPSK |
| Min. RX Sensitivity | No | -80 dBM |
| Video | ||
| Video Compression | MPEG-4 | |
| Max. Frame Rate vs. Resolution | NTSC: 30fps at 720 x 480 (D1) |
|
| Bit Rate | Up to 6Mbps | |
| Audio | ||
| Sampling Rate | 48KHz, Stereo | |
| S/N Ratio | 63dB | |
| Data | ||
| RS485 | 2-wire RS485 Half Duplex Baud Rate: 2400/4800/9600 bps Fixed Formats: 1 Start bit, 1 Stop bit, 8 Data Bits, No Parity 120?Termination Resistor ON/OFF Setting |
|
| LED Indicators | ||
| Red LED | Power On and RF Link Status | |
| Green LED | RS-485 Data Link Status | |
| Mechanical & Environmental | ||
| Power Consumption | 230mA @ 12VDC | |
| Operation Temperature | -10°C~50°C | |
| Storage Temperature | -30°C~85°C | |
| Brand | CCTVCameraWorld |
|---|---|
| Series | AvaEye |
| Warranty | 1 Year |
| Return Policy | 30 Days Return Policy |
Write Your Own Review