1000ft Cat6 Plenum (CMP) Network Cable, White, 23AWG Solid Copper, LSFRPVC

This 1000-ft roll of white Cat6 plenum cable is built for clean, professional in-ceiling and return-air runs where safety codes require a low-smoke, fire-resistant jacket. It uses 23AWG solid bare copper conductors (no CCA), a center spline to separate the pairs, and a smooth-pull plenum (CMP) jacket that’s sweep-tested to 550 MHz for reliable Gigabit Ethernet and PoE devices. The cable meets ANSI/TIA-568.2-D Category 6 performance and NFPA-262 plenum flame requirements, and ships in an easy “reel-in-box” with a rip cord to simplify terminations and long pulls.

When to use this cable

• Running network lines through return-air drop ceilings or other plenum spaces in offices, schools, healthcare facilities, and commercial buildings where CMP is required by code.
• Powering and networking PoE/PoE+/PoE++ Type 3 devices like IP security cameras, NVR uplinks, wireless access points, and VoIP phones over a single cable.
• New construction or remodels needing standards-compliant Cat6 for 1000BASE-T with headroom to reduce crosstalk and maintain signal quality on long pulls.

Note for installers: This plenum cable is designed for indoor use in air-handling spaces. For outdoor or direct-burial runs, use a cable rated for those environments. Always follow local codes and best-practice termination standards for Cat6.

Specifications