4K 8MP 4-in-1 Analog Camera - Avalonix turret camera with switchable CVI, TVI, AHD, and CVBS video for use with compatible analog and hybrid DVR systems.
87 Degree View and 98ft Night Vision - The fixed 3.6mm lens provides an 87 degree horizontal view, while Smart IR supplies black-and-white night video up to 98ft.
Up to 30fps 4K CVI Output - Supports 4K CVI video output at up to 25/30fps and 4K TVI or AHD output at up to 15fps. Actual recording frame rate depends on the DVR.
Upgrade Existing Coax Systems - Uses a standard BNC video connection and works over quality coax cable or solid copper CAT5e/CAT6 with compatible 4K video baluns.
Outdoor Metal Turret Design - IP67 weather resistance, metal construction, Smart IR, DWDR, 12V DC power, and adjustable turret aiming make it suitable for indoor or outdoor installation.
Choose quantities for each item. Set a quantity to 0 to remove it.
Optional Mounts
Junction Box for Mini Dome Cameras
Junction Box for Mini Dome Cameras
SKU: JB13
Mini Dome Camera Junction Box - White metal junction box for select metal eyeball dome camera models with matching holes.
Weather Resistant When Installed - Helps protect the camera pigtail and connection area from outdoor exposure.
Conduit Cutout - Built with a G3/4 conduit thread size for routing cable into the junction box.
Direct Or Pole Mount Use - Can mount directly to a wall or connect to the compatible mini pole mount bracket listed for this item.
Compact Aluminum Body - Measures 3.81 x 1.32 inches with a 2.21 lb load rating and 0.36 lb product weight.
Compatibility Note - Listed for specific mini dome models, including the 2K vandal resistant IP dome camera noted in the row data.
Wall Mount Arm Bracket - For installing select turret and dome cameras on a vertical wall surface.
White Aluminum Body - Metal construction with a white finish for indoor or outdoor camera mounting areas.
Cable Pass Through - Provides space for the camera pigtail so wiring can be routed through the bracket for a cleaner install.
Select Camera Fit - Check the camera product description before ordering because the pre-drilled holes match specific dome models.
Size And Load - Measures 6.3 x 4.8 x 3.0 inches and supports up to 2.2 lbs.
Mini Pole Mount Bracket - Pole mount adapter for select smaller security cameras when used with a compatible junction box.
Select Junction Box Compatibility - Pre-drilled plate connects with compatible junction boxes for certain fixed camera installations.
Mast Mounting Range - Designed for masts at least 3.15 inches in diameter, with rear straps supporting up to 5.91 inch mast diameter.
White Aluminum Build - Weather resistant aluminum plate for supported professional outdoor or indoor installs.
Alternate Use - Can also mount select cameras carried by CCTV Camera World directly to rafters when COMPATIBILITY is supported.
Key Specs - 4.94 x 4.49 x 0.79 inches, 6.6 lb load rating, 0.6 lb weight, -40F to 140F operating range.
12V DC 1 Amp Power Supply - Provides 12V DC output for compatible CCTV cameras and other low-voltage security camera equipment.
Center Positive 2.1Mm Plug - Uses a common 2.1mm center-positive DC connector for compatible devices.
Indoor Or Enclosure Use - Designed for indoor use or placement inside a suitable outdoor enclosure.
Power Matching Required - Check the device voltage, amperage, connector size, and polarity before connecting.
Long Run Note - For cable runs over 100ft on 18 AWG power wire, a higher amperage 12V supply may be needed to account for voltage drop.
500ft Solid Copper RG59 Siamese Video Power Cable Roll, White
500ft Solid Copper RG59 Siamese Video Power Cable Roll, White
SKU: WFC500W
500ft Solid Copper RG59 Siamese Cable - White roll for HD over coax and analog camera installations that need video and power in one pull.
Solid Copper Video Conductor - Built for cleaner signal quality on longer coax runs compared with lower grade CCA wire.
18Awg Power Pair - Includes two lead power wire for sending 12V DC power from a central supply when the installation supports it.
Weatherproof Jacket - Suitable for indoor or outdoor cable runs when installed properly and protected at terminations.
Long Run Use - A better choice for runs over 300ft than economical CCA Siamese cable.
500ft Solid Copper RG59 Siamese Video Power Cable Roll, Black
500ft Solid Copper RG59 Siamese Video Power Cable Roll, Black
SKU: WFC500B
500ft Solid Copper RG59 Roll - Black Siamese video and power cable for higher quality analog and HD over coax installations.
Solid Copper Video Conductor - Full solid copper RG59U coax is suited for demanding or longer coax camera runs.
18Awg Power Wire - Includes 2-lead 18AWG power wire in the same Siamese cable jacket.
95 Percent Copper Braid - Shielding helps protect signal quality compared with cheaper cable options.
Long Run Guidance - Recommended over CCA or CCS cable for runs longer than 300ft with higher resolution analog, HD-CVI, TVI, or HD-SDI installs.
Connectors Sold Separately - Field termination requires compatible BNC connectors and power terminals.
1000ft Solid Copper CCTV Siamese Cable RG59U with 18/2 Power, White
1000ft Solid Copper CCTV Siamese Cable RG59U with 18/2 Power, White
SKU: WFC1000W
1000ft Solid Copper RG59 Siamese Cable - White video and power cable roll for HD over coax and analog camera installations.
Solid Copper Video Core - Uses a 20AWG solid copper conductor for stronger long-run signal quality than CCA cable.
Power Pair Included - Combines coax video with two lead power wire so compatible cameras can be powered from a central supply.
95 Percent Copper Braid - Helps protect the video signal when installed with the proper BNC connectors and cable handling.
Long Run Use - Better suited for runs over 300ft than economical Siamese cable options.
1000ft Solid Copper RG59 CCTV Siamese Video Power Cable Roll, Black
1000ft Solid Copper RG59 CCTV Siamese Video Power Cable Roll, Black
SKU: WFC1000B
1000ft Solid Copper RG59 Siamese Cable - Black video and power cable roll for HD over coax and analog camera installations.
Solid Copper Video Core - Uses a 20AWG solid copper video conductor for better long-run signal quality than lower grade CCA cable.
18Awg Power Pair - Includes two lead power wire for sending low voltage camera power from a central location.
95 Percent Copper Braid - Adds shielding to help maintain clean video when the cable is terminated and routed correctly.
Long Run Use - Recommended when the installation needs higher quality cable for runs longer than 300ft.
Bulk Cable Connectors for the cable roll you picked
Twist on BNC Connector
Twist on BNC Connector
SKU: BNC02
Twist-On BNC Connector - Tool-light BNC connector for terminating RG59 coax cable without a crimp tool.
RG59U Cable Use - Designed for RG59U coax and siamese cable from a roll, not for premade cable ends.
Field Termination - Strip the coax cable, expose the center conductor, and twist the connector onto the cable end.
Installer Friendly - Useful for basic camera cable repairs, custom cable lengths, and quick analog video connections.
Extra Protection Recommended - Electrical tape or heat shrink can help protect the cable end from moisture after installation.
BNC Crimp Connector - 2-piece BNC connector for terminating RG59U coax cable used in analog camera wiring.
RG59U Cable Fit - Designed for RG59U coax from a cable roll, including siamese camera cable with a 20 AWG center conductor.
Crimp Tool Required - Requires proper cable stripping and a compatible BNC crimping tool for installation.
Not For Premade Cable - Not intended for premade siamese cables that already have molded ends.
Pro Install Part - Useful for installers and DIY users making custom-length BNC video cables.
Single Connector - Listing is for one BNC crimp connector.
Male DC Power Terminal - Screw-terminal adapter with a 2.1mm male DC plug for low-voltage camera power wiring.
No Splicing Needed - Lets installers terminate two-lead bare wire to a DC plug without cutting into a camera pigtail.
12V DC Compatible - Designed for compatible 12V DC power connections using matching polarity and plug size.
Screw-In Terminals - Bare wire is secured using screw terminals, making it useful with siamese cabling, power boxes, and 18AWG DC wire.
Center Positive Plug - Uses center-positive wiring for matching equipment.
Protection Note - For outdoor use, protect the terminal area with tape, heat shrink, or an electrical enclosure.
Female DC Power Terminal - Screw-terminal adapter with a 2.1mm female DC jack for low-voltage camera power wiring.
Power Supply Connection - Lets installers terminate two-lead bare wire to a DC jack for compatible power supply connections.
12V DC Compatible - Designed for matching 12V DC low-voltage equipment with the proper plug size and polarity.
Screw-In Terminals - Bare wire is secured using screw terminals, which is useful with siamese cable and 18AWG DC wire.
Center Positive Jack - Uses center-positive wiring for compatible camera power applications.
Protection Note - For outdoor use, protect the terminal area with tape, heat shrink, or an electrical enclosure.
Avalonix SeriesUse with Avalonix PoE cameras and NVRsMatched recorders, cameras and mounts from the same series set up together on one app.Browse Avalonix
The Avalonix 4K6002 is a 4K 8MP analog turret security camera made for customers who want better video from a traditional wired coax camera system without changing everything over to IP cameras. It uses a standard BNC video connection and works with compatible CVI, TVI, AHD and CVBS DVRs.
What makes this camera a little different from many basic 4K analog cameras is the range of video formats it supports. In CVI mode, the camera can output 4K video at up to 25/30fps. It can also output 4K at 15fps in TVI or AHD mode. That gives installers more flexibility when replacing cameras on an existing system or matching the camera to a new security DVR.
The camera has a fixed 3.6mm lens with an approximately 87° horizontal viewing angle. That is wide enough for many entrances, rooms, storefronts, driveways and general outdoor areas without going so wide that everything in the distance becomes very small. At night, built-in Smart IR provides black-and-white night vision at distances up to about 98ft.
4K Analog Video with CVI, TVI, AHD and CVBS
The 4K6002 is better described as a 4-in-1 analog security camera than as only a CVI camera. Its BNC video output can be switched between CVI, TVI, AHD and CVBS, which makes it useful with a much wider range of analog and hybrid DVRs.
Video Format
Supported Output
CVI
4K at 25/30fps or 15fps; 5MP at 20fps; 4MP at 25/30fps
TVI
4K at 15fps
AHD
4K at 15fps
CVBS
960H standard-definition video
There is one thing worth understanding about the 30fps specification. The camera itself can send a 4K CVI signal at up to 30 frames per second, but that does not mean every DVR will record the camera at 4K 30fps. Most 4K analog DVRs record 8MP analog cameras at a lower frame rate, often somewhere around 7 to 15fps depending on the recorder and channel configuration. The higher frame rate from the camera is commonly more noticeable during live viewing.
If recorded frame rate is important for your application, check the 8MP recording specification of the DVR rather than looking only at the maximum frame rate printed for the camera.
3.6mm Lens with an 87° Viewing Angle
The fixed 3.6mm lens gives the 4K6002 an approximately 87° horizontal viewing angle. For a general-purpose security camera, that is a useful middle ground. You can cover a reasonably wide area while still keeping more detail on people and objects than you would normally get from an extremely wide lens.
The turret can be physically aimed after installation, so it works well on ceilings, soffits and walls where the camera needs to be pointed toward a doorway, walkway, parking area or another specific part of the property.
Up to 98ft Smart IR Night Vision
When the light level drops, the camera switches to infrared night vision using a mechanical IR-cut filter. Twelve infrared LEDs provide illumination at distances up to approximately 98ft. In complete darkness the picture changes to black and white.
Smart IR helps control the strength of the infrared light when someone gets closer to the camera. This can reduce the bright, washed-out faces and clothing that sometimes show up when a person walks directly in front of a basic IR camera.
Use It to Upgrade an Existing Coax Camera System
If you already have BNC security camera wiring in place, the 4K6002 can be a practical way to move up to a higher-resolution camera without rewiring the property for Ethernet. The important part is making sure the existing DVR and cable are capable of carrying the resolution and video format you want to use.
A DVR does not necessarily have to support 4K for the camera to work at all. The camera also provides lower-resolution CVI modes and a CVBS output. Compatibility still depends on what signal formats and resolutions the DVR accepts, so an old recorder should not be assumed compatible simply because it has BNC connectors.
If you are replacing cameras on an existing system and are not sure what the recorder supports, contact us with the make and model of the DVR before ordering.
Compatible Avalonix DVR Recorders
For full 8MP video, pair the 4K6002 with a compatible 4K analog or hybrid XVR. CCTV Camera World carries Avalonix DVRs that can work with combinations of analog HD cameras and IP cameras, which is useful when upgrading a system a few cameras at a time.
Remember that the DVR's recording frame rate is separate from the frame rate the camera is capable of sending. Check the recorder's 8MP recording specifications if you need a certain number of recorded frames per second.
What Cable Should I Use?
Good cable matters more as analog camera resolution goes up. For a permanent 4K installation, we recommend solid copper RG59 Siamese coax cable or premade Siamese cable that is specifically rated for 4K analog video. Siamese cable keeps the BNC video cable and the camera's power conductors together in one run.
The 4K6002 can also be installed over solid copper CAT5e or CAT6 using compatible video baluns. Our video and power baluns have been tested for 4K video and are useful when both video and 12V power need to travel over network cable.
When video and power are both being carried over CAT5e, we recommend keeping the cable run to about 150ft or less using solid copper cable. Longer power runs can cause voltage drop even when the video signal itself is still good.
For longer distances, use a compatible HD analog video balun for the video signal and place the 12V power source closer to the camera. Video can be carried up to approximately 500ft in a properly installed system while keeping camera power within a shorter distance. Browse our solid copper CAT5e and CAT6 network cable options for balun installations.
Connect the Camera Directly to a TV
A DVR is not required if you only need a live picture on a television or monitor. The camera can be connected to our BNC to HDMI converter, which accepts 4K CVI, TVI and AHD camera signals and converts them to an HDMI output.
The converter outputs video at up to 1080P over HDMI, so it does not send a native 4K HDMI picture to the television. It is mainly useful when you want to view the analog camera directly without installing a DVR.
Outdoor-Rated Metal Turret Housing
The camera housing is metal and carries an IP67 weather-resistance rating. It can be used indoors or outdoors and is specified for operating temperatures from -20°F to 140°F.
Its turret-style housing is also compact at roughly 3.68 inches in diameter and 3.13 inches high. There is no large outer glass dome in front of the lens, which helps make the camera easy to aim and keeps the overall installation fairly low profile.
DORI Viewing Distances
DORI measurements are useful when deciding roughly how much detail a camera may provide at different distances. They are planning guidelines rather than guaranteed facial identification distances because lighting, motion, camera angle, installation height and DVR settings all affect the finished video.
DORI Level
3.6mm Lens
Detect
350ft
Observe
140ft
Recognize
70ft
Identify
35ft
What's Included
The 4K6002 package includes the Avalonix turret camera and the mounting hardware shown below. A DVR, camera cable and 12V DC power supply are not included unless they are selected separately as part of your installation.
Optional Mounting Options
4K6002 Technical Specifications
Camera Type
4-in-1 analog turret security camera
Image Sensor
1/2.7-inch CMOS
Maximum Resolution
8MP 4K, 3840 × 2160
Video Formats
CVI, TVI, AHD, CVBS
CVI Frame Rate
4K 25/30fps; 4K 15fps; 5MP 20fps; 4MP 25/30fps
TVI Frame Rate
4K 15fps
AHD Frame Rate
4K 15fps
CVBS
960H
Lens
3.6mm fixed lens
Maximum Aperture
F2.0
Horizontal Viewing Angle
87°
Vertical Viewing Angle
47°
Diagonal Viewing Angle
104°
Minimum Illumination
0.03 lux at F2.0; 0 lux with IR on
Night Vision
Up to 98ft
IR LEDs
12
Smart IR
Yes
Day/Night
Automatic mechanical IR-cut filter
Backlight Compensation
BLC, HLC, DWDR
Noise Reduction
2D NR
Privacy Masking
Up to 8 rectangular areas
Video Connection
BNC
Power
12V DC ±30%
Maximum Power Consumption
4.3W with IR on
Housing
Metal
Weather Rating
IP67
Operating Temperature
-20°F to 140°F
Dimensions
Approximately 3.68" diameter × 3.13" high
Camera Weight
Approximately 0.60 lb
Frequently Asked Questions
Does the 4K6002 support CVI, TVI and AHD?
Yes. The camera has switchable CVI, TVI, AHD and CVBS video output. CVI supports 4K at up to 25/30fps, while TVI and AHD support 4K at up to 15fps.
Will the camera record 4K video at 30fps?
The camera can output a 4K CVI signal at up to 30fps, but the DVR determines the recorded frame rate. Most 4K analog DVRs record 8MP cameras at a lower frame rate, often around 7 to 15fps. You may still see smoother video during live viewing when the DVR supports the higher incoming frame rate.
Will the 4K6002 work with a DVR that is not 4K?
It can work with some non-4K DVRs, but compatibility depends on the signal format and resolutions supported by the recorder. The camera offers CVI modes below 4K as well as CVBS output. If you have an older DVR, contact us with its make and model rather than assuming it will work based only on the BNC connector.
Can I connect this camera directly to a TV?
Yes. You can use a compatible BNC-to-HDMI converter to connect the camera to an HDMI television or monitor without a DVR. Our converter accepts 4K CVI, TVI and AHD input and outputs video at up to 1080P through HDMI.
What type of cable should I use with the 4K6002?
For 4K coax installations, we recommend solid copper RG59 Siamese cable or premade coax cable specifically rated for 4K analog cameras. The camera can also be installed over solid copper CAT5e or CAT6 using compatible 4K video baluns.
Can I send video and power over CAT5e cable?
Yes, with compatible video and power baluns. We recommend solid copper CAT5e or CAT6 and keeping video-plus-power runs to about 150ft. For longer distances, carry the video farther with HD baluns while placing the camera's 12V power supply closer to the camera to reduce voltage drop.
How far can the analog video signal run over network cable?
With compatible 4K HD video baluns and good solid copper network cable, video can be carried up to approximately 500ft. Power distance is a separate issue, so the 12V power source should normally remain much closer to the camera.
How far does the night vision reach?
The built-in infrared LEDs are rated for up to approximately 98ft. Actual usable distance varies with the scene, reflected IR light, weather and surrounding lighting.
Can the 4K6002 be installed outdoors?
Yes. The camera has an all-metal IP67-rated housing and is designed for indoor or outdoor use.
Is this a PoE camera?
No. The 4K6002 is an analog BNC security camera. Video is carried through its BNC connector and the camera requires 12V DC power.
Does the 4K6002 have a built-in microphone?
No. This model does not have a built-in microphone. If audio recording is required, the DVR and installation must support a separate microphone or another audio-capable camera.
Camera Type
Analog
Image Sensor
1/2.7" 8MP CMOS Sensor
Video Encoding
Analog
Resolution
8MP 4K
Lens
3.6mm
Field of View
87°
Optical Zoom
No
Wide Dynamic Range (WDR)
DWDR
IR Night Vision
98ft
Important Features
Requires 4K Analog DVR for use, 4-in-1 CVI/TVI/AHD/CVBS, 4K CVI up to 30fps, Smart IR
Good camera for the price. I got 7fps out of this 4K camera.i wasn’t aware that very few DVR recorders can do any higher fps with coax cameras. While I would have preferred more I can’t complain as it was about a hundred dollars cheaper than a 4K ip camera.