16 Channel Passive Video Balun Receiver & Power Supply Hub

Product questions Write a review

Request volume pricing

Loading secure form…
SKU: BPH16
Series: AvaEye

Product overview

16 Channel Video Power Balun Hub - Combines a 16 channel passive video balun receiver with centralized power distribution for analog camera installs.

Cat5E Or Cat6 Cabling - Sends video and power over network or UTP cable when used with compatible video power baluns at each camera.

Centralized Power Design - Replaces many individual power adapters with one hub-style power source for compatible 12V camera layouts.

Video Format Support - Supports common analog camera formats confirmed for this hub, including 1080P, 720P, and CVBS.

110V Ac Powered - Connects to standard 110V AC power for the hub.

Installation Limits - Power distance depends on cable type, camera power draw, and balun setup, so confirm requirements before installation.

$320.00

In stock

  • 30 Day Returns
  • No Monthly Fees
  • US Based Support
  • Free Ground Shipping over $300 to Continental USA
AvaEye SeriesUse with AvaEye PoE cameras and NVRsMatched recorders, cameras and mounts from the same series set up together on one app.Browse AvaEye

16 Camera Video Balun Receiver with Power Distribution capabilities, allows for video and power transmission to analog cameras using CAT5e or CAT6 cable with our video power baluns. This 16 channel passive video power balun hub allows you to consolidate your power supply into one source as opposed to 16 individual power adapters, or using a separate video balun hub and CCTV power distribution box.

Possible system setups:

Method 1: Direct connection to video balun and DVR
Connect DVR directly to the BNC video outputs on the receiver, and run network or UTP twisted pair cable to camera location (and terminate with passive video power baluns. Note max 12V DC power distance is 750ft for this type of video/power balun hub, depending on power consumption of the camera being used.


 

Method 2: Relay method
Use this video power balun hub as a relay point between a camera and 16 channel video balun receiver that is active or passive (only works with identical units). You can use this hub up to 750ft away from a video power balun connected to a camera to carry both video power signals. Video signals from up to 4 cameras can be retransmitted or relayed using a single RJ45 port labeled "4 in 1" to another multi-channel video balun receiver. This relay method allows the user to transmit video up to an additional 1300ft (CVBS) from this hub. This method is very useful in scenarios where several camera signals need to be consolidated to make wiring neater for large business installations with long cable runs.

Please the relay method requires the use of two identical transceiver units, and the cameras must be in CVBS standard definition mode. HD analog signals do not work in relay mode.

 

Features

  • Realtime video transmission of analog video signals
  • Compatible with HDTVI / AHD / 
    4MP over COAX Cable RG/59 HDCVI cameras offer high performance, reliability, and overall ease of use.
    4MP XVR DVR featuring seamless video recording from HDCVI/TVI/AHD Analog CVBS, and IP sources simultaneously.
    2K 4MP HDCVI Cameras
    2K 4MP XVR DVR Recorders" data-original-title="HDCVI">HDCVI video signals
  • Compatible with 960H signal from Analog CVBS cameras
  • Video transmission distance
    • Analog CVBS up to 1300ft
    • 720P up to 1300ft
    • 1080P up to 620ft
  • Rackmount design comes with Rackmount ears

What's Included?

Specifications

Transceiver Type 16 CH Passive Video Balun Receiver & Power Supply Hub (VPS)
Video/Power Inputs 16 x RJ45
Video Output 16 x BNC for connection to DVR, 2 x RJ45 for relay to multi-channel balun receiver
Video Frequency Response Range: DC-5MHz;  Common-Mode / Differential-Mode rejection: 5KHz-5MHz 60dB type
Compatible Wire Type 24-16AWG UTP CAT5 or higher; DC loop resistance <= 18Ω/ 100m; Differential capacitance: 62pF/m (max)
Impedance UTP or Connection or RJ-45: 100Ω;  BNC Coax:75Ω
Power Input 110V AC
Power Output 12VDC 1.06 Amp (Total 8.5 Amp)
Power Transmission 12V DC up to 750 ft Via UTP CAT5e or CAT6 Solid Copper
Dimensions 19.4" x 6.7" x 1.8"
Weight 7.1 lbs
Brand CCTVCameraWorld
Series AvaEye
Warranty None for accessories
Return Policy Accessories are non-returnable, non-refundable.

Customer Reviews

Write Your Own Review

You're reviewing: 16 Channel Passive Video Balun Receiver & Power Supply Hub
Your Rating:
loader
Loading...

Product Questions

No questions yet. Be the first to ask the question!

Are you sure you would like to remove this item from the shopping cart?

This item is a part of the approved quote. Removing it will remove all quote items from the cart.

Loading...