4MP HDCVI Turret Dome Camera - Avalonix 2K HD-over-coax turret camera for compatible 4MP HDCVI DVR systems.
Manual Varifocal Lens - The 2.7-13.5mm lens can be adjusted during installation from a wide 98 degree view to a tighter 26 degree view.
100ft Night Vision - Built-in IR LEDs provide black-and-white night video up to 100ft for general nighttime coverage.
Coax System Upgrade - Sends 4MP HDCVI video over quality coax cabling and can be switched to CVBS output when supported by the installation equipment.
Turret Mounting Design - Eyeball turret body allows flexible aiming on walls or ceilings without the glare concerns common to some traditional domes.
Outdoor Camera Features - Includes IP67 weather resistance, metal construction, Smart IR, digital noise reduction, 12V DC power, and optional mounting accessories.
Choose quantities for each item. Set a quantity to 0 to remove it.
Power Adaptor
12V DC 1 Amp Power Supply
12V DC 1 Amp Power Supply
SKU: 12V1
12V DC 1 Amp Power Supply - Provides 12V DC output for compatible CCTV cameras and other low-voltage security camera equipment.
Center Positive 2.1Mm Plug - Uses a common 2.1mm center-positive DC connector for compatible devices.
Indoor Or Enclosure Use - Designed for indoor use or placement inside a suitable outdoor enclosure.
Power Matching Required - Check the device voltage, amperage, connector size, and polarity before connecting.
Long Run Note - For cable runs over 100ft on 18 AWG power wire, a higher amperage 12V supply may be needed to account for voltage drop.
500ft RG59U Siamese Roll - White video and power cable roll for CCTV camera installations.
Video And Power Cabling - Combines RG59U coax with 18AWG 2-lead power wire for one cable pull.
Economical Cca Conductor - 20AWG CCA video conductor with 95 percent copper braid for budget-conscious installs.
Outdoor Weatherproof Wire - Jacket is listed for outdoor weatherproof use.
HD Run Limit Guidance - Listed as an economical choice for HD camera runs under 350ft.
Pull Out Box - Supplied in a box for easier cable access during installation.
Connectors Sold Separately - BNC connectors and power terminals are needed for termination.
500ft Black Siamese Roll - RG59U video and power cable roll for CCTV camera installations.
One Cable Pull - Carries video over coax and power over 18AWG 2-lead wire in the same jacket.
Economical Cca Coax - Uses a 20AWG CCA video conductor with 95 percent copper braid.
Outdoor Weatherproof Wire - Black jacket is intended for outdoor weatherproof cable use.
HD Run Limit Guidance - Listed as an economical choice for HD camera runs less than 350ft.
Pull Out Box - Box packaging helps feed the cable during installation.
Connectors Sold Separately - Purchase compatible BNC connectors and power terminals for field termination.
1000ft CCTV Siamese Cable RG59U with 18/2 Power, White
1000ft CCTV Siamese Cable RG59U with 18/2 Power, White
SKU: SCWIRE10W
1000ft RG59U Siamese Cable - White economical video and power cable for compatible HD over coax and analog camera installations.
Video And Power In One Pull - Carries camera video and low voltage power through one Siamese cable run.
20Awg Cca Video Conductor - Built as a budget cable option for shorter HD camera runs where CCA wire is acceptable.
95 Percent Copper Braid - Provides shielding for cleaner video when installed with proper connectors and routing.
Run Length Guidance - Product page recommends this economical cable for runs less than 350ft.
1000ft RG59U Siamese Cable - Black economical video and power cable for compatible HD over coax and analog camera installations.
Video And Power In One Pull - Combines RG59U coax with a two lead power pair to reduce separate cable runs.
20Awg Cca Video Conductor - Designed as an economical cable choice for shorter HD camera runs where CCA cable is acceptable.
95 Percent Copper Braid - Helps protect the video signal when the cable is installed correctly.
Run Length Guidance - Best kept to runs under 350ft based on the product page recommendation.
Bulk Cable Connectors for the cable roll you picked
Twist on BNC Connector
Twist on BNC Connector
SKU: BNC02
Twist-On BNC Connector - Tool-light BNC connector for terminating RG59 coax cable without a crimp tool.
RG59U Cable Use - Designed for RG59U coax and siamese cable from a roll, not for premade cable ends.
Field Termination - Strip the coax cable, expose the center conductor, and twist the connector onto the cable end.
Installer Friendly - Useful for basic camera cable repairs, custom cable lengths, and quick analog video connections.
Extra Protection Recommended - Electrical tape or heat shrink can help protect the cable end from moisture after installation.
BNC Crimp Connector - 2-piece BNC connector for terminating RG59U coax cable used in analog camera wiring.
RG59U Cable Fit - Designed for RG59U coax from a cable roll, including siamese camera cable with a 20 AWG center conductor.
Crimp Tool Required - Requires proper cable stripping and a compatible BNC crimping tool for installation.
Not For Premade Cable - Not intended for premade siamese cables that already have molded ends.
Pro Install Part - Useful for installers and DIY users making custom-length BNC video cables.
Single Connector - Listing is for one BNC crimp connector.
Male DC Power Terminal - Screw-terminal adapter with a 2.1mm male DC plug for low-voltage camera power wiring.
No Splicing Needed - Lets installers terminate two-lead bare wire to a DC plug without cutting into a camera pigtail.
12V DC Compatible - Designed for compatible 12V DC power connections using matching polarity and plug size.
Screw-In Terminals - Bare wire is secured using screw terminals, making it useful with siamese cabling, power boxes, and 18AWG DC wire.
Center Positive Plug - Uses center-positive wiring for matching equipment.
Protection Note - For outdoor use, protect the terminal area with tape, heat shrink, or an electrical enclosure.
Female DC Power Terminal - Screw-terminal adapter with a 2.1mm female DC jack for low-voltage camera power wiring.
Power Supply Connection - Lets installers terminate two-lead bare wire to a DC jack for compatible power supply connections.
12V DC Compatible - Designed for matching 12V DC low-voltage equipment with the proper plug size and polarity.
Screw-In Terminals - Bare wire is secured using screw terminals, which is useful with siamese cable and 18AWG DC wire.
Center Positive Jack - Uses center-positive wiring for compatible camera power applications.
Protection Note - For outdoor use, protect the terminal area with tape, heat shrink, or an electrical enclosure.
Avalonix SeriesUse with Avalonix PoE cameras and NVRsMatched recorders, cameras and mounts from the same series set up together on one app.Browse Avalonix
This Turret dome camera requires a 4MP HDCVI DVR to record real-time at 4MP, 1080p, or 720p. The camera has a 2.7-13.5mm manual varifocal lens that can be adjusted using a small flathead screwdriver. With manual adjustment you can rotate the zoom lens of the camera and capture an angle of view as wide as 98° or as narrow as 26°.
20 IR LEDs for night vision allow this 4MP eyeball dome camera to see general detail in low light conditions or even complete darkness up to 100ft. The detailed, 2K video recording records significantly better clarity than 1080P cameras and produces clear, and less pixelated digital zoom. With 2K 4MP resolution at 80° angle view you can see a face up to 40ft away during the day, or 70ft when set to full zoom.
If you're looking to upgrade an older analog security camera you can still use this camera by switching its video output to analog mode (CVBS). While the video will not be 2K in analog mode, it will still be better than an older analog resolution camera since the video is being capture by a 4MP sensor.
What is a Varifocal Zoom Lens?
Varifocal zoom lenses allow the user to adjust the lens manually by hand on the camera to the perfect zoom level (angle of view). After the user has found the sweet spot for angle of view, a varifocal lens also allows for fine focus adjustment. This enables installers or home consumers to rely on their best judgment when installing a camera to find the best possible angle of view to capture potential intruders, or to keep an eye on a particular spot on the property.
Features
2K 4MP Turret Style Camera with Varifocal Lens
Eyeball dome design allows freedom to point the camera in any direction
Day/Night sensor technology switches the camera to black & white in complete darkness
IP67 weatherproof rating
Metal construction
Wall / Ceiling Mountable
Optional Mounts Available
12V DC Power Input
Switchable BNC video output (HDCVI or CVBS) using a compatible DVR or UTC Controller
Requires DVR that accepts 4MP or higher resolution HDCVI signal
What’s Included?
(1) 4MP Turret Dome Camera with Zoom
Specifications
Image Sensor
1/3" Progressive Scan CMOS
Resolution
4.1 MP
Effective Pixels
2688 (H) x 1520 (V)
Frame Rate
30fps 4MP/1080P/720P
Shutter Speed
1/3 - 1/100,000s
Lens
2.7-13.5mm Manual Varifocal Lens
Close Focus
7.87"
Angle of View
98°-26°
Minimum Illumination
0.03 Lux, 0 Lux IR On
Max Recognize*
42ft (wide angle), 120ft (full zoom)
Max Identify*
21ft (wide angle), 73ft (full zoom)
IR LEDs
20 IR LEDs
IR Distance
100ft
IR Control
Auto / Manual
Day/ Night
Auto (ICR) / Manual
Backlight Compensation
BLC / HLC / DWDR
White Balance
Auto, Manual
Noise Reduction
2D
Smart IR
Auto, Manual
Video Connector
1x BNC
Video Signal
HDCVI, CVBS Output (OSD Switchable)
Audio Input
N/A
OSD
Via HDCVI DVR or UTC controller
Operating Temperature
-40°F to +140°F
Weather Resistance
IP67
Construction
Aluminum
Dimensions
4.69" x 3.83" (diameter x height)
Weight
1.3 lbs
Power
12V DC 4.6W
Certifications
CE, UL
*Distance is calculated based on sensor specifications and lab test results in ideal daylight conditions without glare. Identification means positive ID of a face, recognize means ability to tell the likeness of an individual.