Description
Details
This is our highest storage capacity 64 channel NVR recorder. You can record up to 64 IP security cameras with resolutions varying from 720P to 12MP, or record all cameras of the same resolution. It is distinct from other standalone 4K camera NVR that we offer in that it has 16 available hot-swap SATA ports with RAID that allow you to replace hard drives without ever turning the unit off. It also has advanced enterprise level external storage options to add even more storage space such as the following:
- Expandable with External 8 Hard Drive eSATA hard drive enclosure
- Expandable with miniSAS connector to external SAN device
- Expandable to a NAS using iSCSI targeting
Most importantly, this 4K NVR with hot swap RAID has the highest video encoding capability of 384Mbps total. Since it allows for up to 20 remote viewing clients, and 4K resolution viewing on the NVR for live viewing and video playback. This NVR has the highest video encoding bit rate available for standalone NVRs on the market, and so do our other 64 Camera NVRs.
Recording Capability
This 4K network video recorder supports any combination of the following resolution cameras up to a maximum of 64 cameras. You can mix and match cameras up to 4K resolution. By choosing this NVR you future proof your system to support the highest resolution possible at this time for IP cameras.
It offers a total recording bandwidth of 384Mbps, which allows either use of all 4K cameras or a mix of any of the above supported resolutions until this bandwidth is filled.
Storage Capacity
This is a 3U rackmountable case that has all the bells and whistles that even a PC based NVR cannot provide. It has16 hot swap hard drive bays that allow for DVR hard drives up to 8TB each, for a total of 128TB. It also features enterprise grade hard drive redundancy; utilizing RAID the user can set to safeguard against data loss. You can also choose to record video in JBOD mode where each drive is written to once it is filled, orspan across drives/groups.
Video back-up is easy using the USB 3.0 port. We also offer an external drive array for NVR storage expansion to add an additional 8 SATA ports, or you can take advantage of the miniSAS connector to expand to a SAN. You can even do live backups using the FTP upload function to backup to a NAS, or to another NVR.
Motion Detection
The NVR can receive motion alerts when using our IP cameras and compatible ONVIF cameras so you can record on motion, or record all the time with a motion log. You can also connect this 64 channel NVR to sensors using its alarm input connections, and attach devices like motion sensors, PA speakers, sirens and strobe lights to its alarm inputs. It comes equipped with 16 alarm input connections and 8 relay outputs. You can receive motion alerts via email based on events triggered by video based motion detection or hardwired sensors. You can even receive Push Alerts to your Smartphone for motion or alarm events without any monthly charges
Remote Viewing
Remote viewing over the web using a mobile device or PC computer is standard for all of our DVRs and NVRs. Using the built-in web server on the recorder you can log in using a web browser, mobile device, or the included Free Central Monitor Software on a Windows or Mac computer. All of our remote viewing apps and computer software are free and do not incur any additional monthly charges. Your security camera system from CCTV Camera World will be accessible from anywhere in the world.
Features
- 64 Channel High Capacity NVR
- H.265 / H.264 Video Encoding
- H.265 encoding provides up to 50% savings in bandwidth when used with a H.265 IP camera
- Total 384Mbps recording bandwidth
- Supports IP cameras up to 12 Megapixels in resolution
- Select individual resolutions per channel
- IP Search Function allows easy detection of compatible IP cameras on the same network
- Compatible with CCTV Camera World IP cameras or 3rd party ONVIF IP cameras
- Up to 36 channel Live Grid Display
- Recorded video grid views dependent on camera resolutions
- (2) HDMI video outputs
- Main HDMI output at 4K resolution
- Secondary HDMI for Spot Out at 1080P
- (1) VGA video output at 1080P
- Email Notification of motion alerts, alarm alerts, or video loss to mobile App
- Push Alerts for motion or alarm events
- Multiple recording methods: continuous, manual, motion activated or schedule based
- Intelligent video analytics when used with cameras with Smart Detection features:
- Tripwire, Intrusion, Abandoned/Missing Object, Scene Change, Face Detection, People Counting, Heat Map
- 360 Degree or 180 Degree Fisheye Camera Dewarp Feature
- Remotely playback and download recorded video
- Remotely backup video to FTP, NAS, windows computer, or mirror to another NVR unit
- Allows easy video backups to USB drive
- 16 Hot Swap SATA HDD Bays, 8TB each max
- 128 TB Total HDD Capacity
- Supports RAID 0/1/5/6/10
- Free Computer Client Software for remote viewing via Windows or Mac computers
- (4) Gigabit RJ45 Network Ports
- Allows up to 20 simultaneous users to view or playback video remotely
- ONVIF 2.4 Compliant
What's Included?
- (1) 64 Channel Hot Swap NVR
- (1) Power Cord
- (1) Mouse
- (16) SATA Cables
- (1) Rack Mount Ears
- (16) Hot Swap Trays
Specifications
| Model | NVR644KE | |||
| System | ||||
| Main Processor | Intel Processor i7 | |||
| Operating System | LINUX | |||
| Video & Audio | ||||
| IP Camera Input | 64 channel | |||
| Two-way Talk | 1channel Input, 1channel Output, RCA | |||
| Display | ||||
| Interface | 2 HDMI (one up to 3840x2160), 1 VGA | |||
| Resolution | 3840×2160, 1920×1080, 1280×1024, 1280×720, 1024×768 | |||
| Multi-screen Display | The 1st screen: 1/4/8/9/16/25/36 | |||
| The 2nd screen: 1/4/8/9/16 | ||||
| OSD | Camera title, Time, Video loss, Camera lock, Motion detection, Recording | |||
| Recording | ||||
| Compression | H.265/H.264/MJPEG | |||
| Resolution | 12MP, 8MP, 6MP, 5MP, 4MP, 3MP, 1080P, 720P, D1 | |||
| Record Rate | 384Mbps | |||
| Bit Rate | 1-20Mbps | |||
| Record Mode | Manual, Schedule(Regular(Continuous), MD(Video detection: Motion detection, Camera blank, Video loss), Alarm), Stop, Smart Detect (Tripwire, Intrusion, Abandoned/Missing Object, Scene Change, Face Detection, People Counting, Heat Map) | |||
| Record Interval | 1-120 min (default: 60 min), Pre-record: 1-30 sec, Post-record: 10-300 sec | |||
| Video Detection & Alarm | ||||
| Trigger Events | Recording, PTZ, Tour, Alarm out, Video Push, Email, FTP, Snapshot, Buzzer & Screen tips | |||
| Video Detection | Motion Detection, MD Zones: 396(22×18), Video Loss & Camera Blank | |||
| Alarm Input | 16 Channels, low level effective, green terminal interface | |||
| Relay Output | 8 Channels, NO/NC Programmable, Green Terminal Interface | |||
| Playback & Backup | ||||
| Playback | 128Mbps in Raid 5 mode 64Mbps in single HDD mode | |||
| Search Mode | Time/Date, Alarm, MD & Exact search (accurate to second) | |||
| Playback Function | Play, Pause, Stop, Rewind, Fast play, Slow play, Next file, Previous file, Next camera, Previous camera, Full screen, Repeat, Shuffle, Backup selection, Digital zoom | |||
| Backup Mode | USB Flash Drive, Network, External USB DVD burner | |||
| Network | ||||
| Interface | 4 RJ-45 ports (10/100/1000Mbps) | |||
| Ethernet Port | 4 Ethernet ports can be configured for teaming or independent port use | |||
| Optical Fiber Interface | 2 Giga Optical fiber interface | |||
| Network Function | HTTP, TCP/IP, IPv4/IPv6, UPnP, RTSP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, PPPoE, DDNS, FTP, Alarm Server, IP Search (Support Avalonix IP cameras, DVR, NVR) | |||
| Max. User Access | 128 users | |||
| Smart Phone | iPhone, iPad, Android | |||
| Storage | ||||
| Internal HDD | 16 SATA III ports, 8TB ea, up to 128TB | |||
| HDD Mode | Single, Raid 0/1/5/6/10 with global HDD hot-spare | |||
| Auxiliary Interface | ||||
| Front cover | Flip down cover with hot swap bays | |||
| USB | 4 USB ports (2 USB2.0, 2 USB3.0) | |||
| eSATA | 1 eSATA port for eSATA expander | |||
| SAS | 1 Mini SAS port | |||
| RS232 | 1 port, For PC communication& keyboard | |||
| RS485 | 1 port, For PTZ control | |||
| General | ||||
| Power Supply | AC100V-240V, 50-60Hz | |||
| Power Consumption | Less than 51W (Without HDD) | |||
| Working Environment | 14°F - +131°F, 10% - 90% RH | |||
| Dimension(W×D×H) | 19.1" x 20.2" x 5.2" | |||
| Weight | 39 lbs (without HDD) | |||
| Installation | Rackmountable 3U | |||
| UL Listed | Yes | |||
More
More
| Return Policy | 30 Days Return Policy |
|---|---|
| Recorder Type | NVR |
| CPU | Embedded Quad Core |
| Total Cameras Supported | 64 |
| Supported Camera Signals | IP |
| Number of BNC Inputs | Does Not Support BNC Cameras |
| Number of IP Cameras Supported | 64 |
| Number of PoE Inputs | None, uses network for connection |
| Number of Audio Inputs | 64 IP Streams |
| Encoding Supported | H.264, H.265 |
| Encoding Support Detail | H.265, H.264, H.264H, H.264B, MJPEG |
| Recording Resolutions | 12MP, 8MP, 4K, 6MP, 5MP, 4MP, 3MP, 1080P, 1.3MP, 720P |
| BNC Recording Frame Rate | No |
| Total Incoming IP Bandwidth | 384 Mbps |
| Total IP Recording Bandwidth | 384 Mbps |
| Max Hard Drive Capacity | 16HDD, 128TB |
| RAID Redundancy | Yes, RAID 0/1/5/6/10 |
| Hot Swap HDD | Yes |
| eSATA Port | One |
| USB Ports | (2) USB 2.0, (2) USB 3.0 |
| Video Outputs | (1) HDMI, (1) VGA, (1) HDMI Spot |
| Total PoE Power | No Built-in PoE Ports |
| Power Input | 110-220V AC |
| Rackmountable | Yes, 3U |
| Warranty | 2 Year |
Reviews
Product Questions
Total 2 question(s)
Can the system be linked to more nvr's?
Can I assign clients specific camera feeds, must be easy to update. Possible daily changes?
Question by: Dennis malone on: 2017-07-26
You can link multiple NVRs using our windows client software to view multiple locations.
All of our NVRs allow for creation of multiple users with different access rights. Please read our article about how to security your security camera system for more information.
Answer by: Tech Support on: 2017-07-27
I have multiple buildings and will be using the ip based design.
Can I control multiple nvr from a central location?
Can I allow multiple user to view specific camera feeds?
Thanks
Question by: Dennis malone on: 2017-07-27
Yes you can control multiple NVR from one location. Please watch the first video on the second row of our Remote Viewing you security camera system page titled Viewing Cameras in Grid View. The video will show you how you can fetch cameras from NVRs on the internet. You can create a view with a mix of cameras from different locations if needed.
All of our NVRs allow for creation of multiple users with different access rights. Please read our article about how to security your security camera system for more information.
Answer by: Tech Support on: 2017-07-27
